2017 Best Toyota 4Runner LED Light Bars for Sale

Like the Toyota Tacoma, the Toyota 4Runner is well known amongst overlanders and prerunners alike. A few years ago it was pretty common to see soccer moms driving lifted JK Wranglers, but that has since changed and now all the soccer moms drive lifted 4Runners. After installing a lift kit and bigger tires, it may be time for some upgraded lighting.

In this short guide, we’re going to take a look at the best LED light bars for a Toyota 4Runner. We’ll look at roof mounted LED light bars, as well as bumper mounted LED light bar and the best mounting systems for both.

Best Roof Mounted LED Light Bars for Toyota Tacoma

Mounting an LED light bar on your roof has a couple of benefits, one of them is decreased shadows on the trail. With your light bar mounted up high it will be aimed down slightly which helps eliminate shadows in certain sections of the trail.

The brackets that come with your LED light bar require you to drill directly into your roof. By adding the weight of your LED light bar to the sheet metal on your roof massive dents will be created where the brackets are mounted. For this reason, we are going to focus on LED light bars that you can buy quality brackets for.

#1 Rigid Industries 40” ADAPT

We’re going to start this list with a very innovative product from Rigid Industries. I will warn you now, this LED light bar is very expensive. If you’re looking for a more budget minded product we have some listed below.

Rigid Industries produces some of the brightest and toughest LED light bars on the market. Their latest ADAPT series can change from eight different beam patterns on the fly. Flood beam for going slow and a narrow spot beam for going fast. The ability to have an LED light bar that can adapt to any situation is paramount.

This particular LED light bar output 27,392 lumens in the flood setting and 21,120 in the spot setting. The most power it uses is 374 watts in mode four and the least power it uses is 276 watts in mode eight. If you have the money there isn’t a better LED light bar you could buy.
Check Latest Price

  • Warranty: Lifetime
  • Power: 374W – 276W
  • Output: 27,392 lumens – 21,120 lumens

#2 Rough Country 40” Curved Black Series

Stepping away from very innovative and expensive LED light bars we have the Rough Country 40” curved Black Series. We like this product because of its decent quality, decent warranty, and low cost. The curved design also helps put more light on the sides of the trail where big rocks might be hiding that could damage your wheel. Plus the Black Series looks way better than a chrome LED light bar.

This light bar outputs 19,020 lumens at 240W which is quite a bit less than the Rigid Industries light bar listed above, but you get what you pay for. This LED light bar is also water and dust resistant so you won’t have to worry about it breaking in rainy conditions. Unlike the Rigid LED light bar listed above, this one is only covered by a three-year warranty. For the price, this LED light bar from Rough Country is pretty hard to beat.
Check Latest Price

  • Warranty: 3 Years
  • Power: 240W
  • Output: 19,020 lumens

#3 Auxbeam 42” Curved Cross Series

If both of the LED light bars listed above are out of your price range, don’t worry we have a solution. We don’t really recommend buying cheap Chinese light bars, but we’ve owned quite a few Auxbeam LED light bars in the past and loved them. Just know the quality isn’t nearly the same with a cheap Chinese LED light bar and you might end up with a broken product down the road.

This particular LED light bar from Auxbeam is part of their “Cross” series which integrates a cross-shaped daytime running light. This feature is a little gimmicky but it can look pretty cool on the right truck. Auxbeam claimed this LED light bar outputs 24,000 lumens at 240W, but it’s probably closer to 18,000 lumens or less. This is because Auxbeam doesn’t properly test the light output of their products, but instead estimates it using who knows what method.
Check Latest Price

  • Warranty: 1 Year
  • Power: 240W
  • Output: 24,000 lumens (Questionable)

Apoc Industries 40” 4Runner Brackets

Like we mentioned above, using the brackets that come with your LED light bar is a very bad idea. These brackets will require you to drill directly into your roof which can cause water leaks. Plus the weight of the LED light bar itself will dent the sheet metal on your roof over time. For this reason, we always recommend purchasing brackets that are designed for your specific vehicle.

In the case of the Toyota 4Runner, Apoc Industries makes the best brackets without a doubt. The brackets are made of tough steel so you won’t have to worry about them bending over time. Plus the brackets are powder coated black so you won’t really have to worry about the paint chipping over time. They come with all the necessary hardware for a quick and clean install.
Check Latest Price

Best Bumper Mounted LED Light Bars for Toyota 4Runner

Although there are benefits to mounting an LED light bar on your roof, there are also some negatives. Mounting an LED light bar on your roof makes it more noticeable, and much more likely to be stolen which is obnoxiously a common occurrence. The biggest problem is windshield glare which occurs with light emitting from the LED light bar splashes down onto your windshield making it very hard to see.

#1 Rigid Industries 30” E-Series Midnight Edition

First up on our list in another Rigid Industries product. Mounting an LED light bar down low on your bumper makes it more susceptible to getting hit by things such as rocks. For this reason, we wanted to recommend a very strong LED light bar with a good warranty backing it up. This, of course, led us to picking a Rigid Industries product.

This particular LED light bar from Rigid outputs 13,800 lumens at 165 watts. We picked the Midnight Edition because of its sinister looks, but the brackets we recommend down below will put the LED light bar behind your grill. This means you could probably use a standard chrome LED light bar and it won’t be an eyesore.
Check Latest Price

  • Warranty: Lifetime
  • Power: 165W
  • Output: 13,600 lumens

#2 Rough Country 30” X5 Series

Second on our list for bumper mounted LED light bars is the X5 Series from Rough Country. This LED light bar has much more of a flood effect thanks to its smaller projectors. The projectors are smaller because Rough Country fit a third row of LEDs in the middle. Although this increases total lumen count it does decrease the range the light can reach.

Thanks to that extra row of LEDs, the light bar from Rough Country outputs a very impressive 16,200 lumens at 180 watts. Unfortunately, the lower does force Rough Country to only back this product with a three-year warranty. Depending on how hard you wheel your 4Runner this short warranty may be an issue.
Check Latest Price

  • Warranty: 3 Years
  • Power: 180W
  • Output: 16,200 lumens

Rago Fabrication 32” Brackets

Mounting an LED light bar behind your grill is pretty hard without brackets specifically designed for it. For this reason, we strongly recommend these Rago Fabrication brackets. The brackets are made of steel you won’t have to worry about them bending or letting your light bar shake around. Plus they have an awesome black powder coat finish so the paint will last a long time
Check Latest Price

If you’re still unsure what LED light bar you want, check out our full Light Bar Buying Guide for tons of information.

About Bryce Cleveland 249 Articles
Bryce founded Dust Runners Automotive Journal in 2014 as a way to write about the cars he found interesting. When he's not writing for Dust Runners he's writing for Power Automedia as a freelancer. He currently drives a 2015 Fiesta ST and absolutely loves it.

Be the first to comment

Leave a Reply

Your email address will not be published.


*