Fox Body Mustang Buying Guide

Are you in the market to purchase a Fox Body Mustang? Here’s everything you should keep an eye out for, and possibly use to your bargaining advantage.
Before we get into the things to look out for we will quickly cover what changes happened in what years:

  • 1979 – Fox Body mustangs hit the dealership floors.
  • 1980 – 5.0L V8 was replaced with a 4.2L V8.
  • 1981 – Hatchback outsold the coupe, which continued throughout the Fox Body’s lifetime
  • 1982 – 5.0L V8 returns due to popular demand.
  • 1983 – Convertible Fox Body was added to the line-up, and front suspension was improved.
  • 1984 – The SVO (2.3L turbocharged Inline-4) was introduced.
  • 1985 – Slightly revised front facia. Last year for the carburetor.
  • 1986 – Third brake light added, last year for the SVO Fox Body, electronic fuel injection was added.
  • 1987 – Major front end redesign
  • 1988 – GT was named in “Ten Best Cars in the World”
  • 1989 – Speed density induction replaced with mass air induction
  • 1990 – Airbag added to the steering wheel
  • 1991 – Foxbody price rises, sales decline
  • 1992 – Color coated side moldings on the body
  • 1993 – Limited edition, SVT Cobra, and SVT Cobra R were released, last year for the Fox Body mustang

Frame

Making sure the frame is good applies to nearly every vehicle purchase you’ll ever make.

  • Look at the windshield pillars for denting, as well as the rear windows for bulges or cracking. This is a sign of a twisted frame.
  • Look at the unibody frame rails for dents, creasing, and rust.
  • Take a look at the shock towers, they are notorious for rusting and cracking.
  • Look at the suspension mounting points from and rear. Occasionally the mounts crack.
  • If it was previously a drag car it may drive a little crooked/sideways down the road.

It’s very common for a Fox Body mustang frame to be twisted, due to the torque monster 5.0L V8 and a weak unibody design. This is especially common for drag cars, so make sure it drives straight down the road before you purchase it.

Fox Body

Engine

The 5.0L is an excellent engine, but like all engines, it has its common problems.

RELATED: The Story of my 1991 Fox Body Mustang

  • Leaky rear main seal, look at the back of the engine/front of the transmission for oil. This is a sign of a leaky rear main.
  • Water pump failure, see if the water pump pulley has any play in it, that’s a sign of a failing water pump.
  • Oil pan leak, look at the bottom of the engine for oil.
  • Low oil pressure at high RPMs. Wind the engine out to redline and see if the oil pressure gauge drops, sometimes the factory oil pump is inadequate at high RPMs.
  • If the engine has aftermarket parts on it ask if it has been tuned by a professional.
  • Ask for receipts for aftermarket parts.

Fox body Mustang

Transmission

If the Fox Body mustang you’re looking to purchase has a manual transmission, there’s a few thing to look for.

RELATED: Top 5 Must Have Fox Body Modifications

  • Make sure it doesn’t pop out of any gears.
  • The clutch should engage about halfway through the pedal travel, if not the cable may be stretched.
  • Broken clutch cable, which is common especially on a Fox Body with aftermarket long tube headers.
  • Broken clutch quadrant, which is also common and a pain in the rear to fix.

If it has an automatic transmission, there are less thing to look for.

  • Abrupt/Harsh shifting. Either the transmission is going bad or it has an aftermarket shift kit
  • Check the fluid, it should be red, it might be a little dark if the fluid hasn’t been changed in a while

Foxbody Mustang

Drivetrain

Drivetrain parts are generally a pain in the butt to fix so make sure that everything is in order.

  • Make sure the rear end doesn’t make any strange noises such as howling.
  • Ask the owner if it has stock gearing in the rear end.
  • Is the driveshaft stock or aftermarket?
  • Make sure the u-joints good, having those explode on the road is not fun.
  • If you have the opportunity, make sure it spins both tires. If not the LSD is old and worn out.
  • Knocking when you get on and off the throttle may be a bad transmission/motor mounts.

Interior

This is arguably the least important part because the interior has no real affect on how it drives. But, if you can score a Fox Body with a clean interior that is always a major plus

RELATED: 7 Reasons the Fox Body Mustang is the best Muscle Car

  • Cracks in the dash are normal. If you find a non-cracked dash you’re in luck.
  • Make sure all the buttons work.
  • Make sure the A/C unit works.
  • Are all the interior panels there?
  • Tears in the seat can always be fixed so don’t be worried about those.
  • If it’s a convertible make sure the top goes up and down properly.

Modifications

Unfortunately, in the automotive industry, the money you put into your car is almost always lost. This sucks when you go to sell your Fox Body that you dumped $10k into, but it can be awesome if you’re the one purchasing it. A Fox Body with $2k worth of go fast parts will probably only sell for $500 more than a Fox Body without those parts.

This does not mean to go after any Fox Body with aftermarket stuff on it. Many times owners will cheap out and put crappy parts on their Fox Body. This can result in major headaches down the road if you decide to purchase said Fox Body. If there are any modifications done to the Fox Body you’re looking at, make sure they’re quality parts. A cobbled together Fox Body is worse off than a completely stock Fox Body.

If it has engine work done to it find out what heads, camshaft, and intake manifold it has. This will give you a rough estimate of what kind of power you can expect it to make. If it has any suspension modifcations ask what brand/model the comonents are. If it has a tubular k-member find out how it changed the suspension geometry.

Conclusion

In all, Fox Body Mustangs are generally problem free, but sometimes things happen. Look for strange body panel gaps, rust, oil leaks, and make sure the transmission shifts properly. None of these problems are deal-breakers, but you should try and use these problems to your bargaining advantage.

Top 5 Must Have Fox Body Mustang Modifications

Unhappy with how your Fox Body performs? Maybe you’re looking at picking up a Fox Body and what to know what you should do to it? Well, as an avid Foxbody enthusiast I knew this question needed answering. So, I have come up with a list of the top 5 mods to do to your Fox Body.

1. Intake

I can tell you from experience, a “cold air intake” isn’t going to gain you any power without modifying the rest of your 5.0’s intake system. The 302 that comes in the Fox Body is quite frankly pretty weak, especially at higher RPMs. An upper and lower intake manifold will yield very impressive gains, especially at the top end of the RPMs.

foxbody intake

A common intake is the Cobra intake manifold, but these are getting hard to find and don’t perform quite as well as modern designed intakes. I prefer Trick Flow, their intake manifolds seems to yield the best power overall. However, to see the greatest gains you’ll need an aftermarket camshaft and aftermarket heads.

  • Hp gain: 30+ rwhp
  • Price: $500- $1,000
  • Install: Easy

2. Heads

The key to making more power with any engine is in the heads. The stock heads on the 5.0 flow air very poorly, and are made of heavy cast-iron. Swapping your heads might seem like a daunting task, but it’s actually pretty easy and will transform your Fox Body. Much like the intake manifold the most common swap is Cobra (GT-40) heads. The GT40 heads flow better than stock, but are still made of heavy cast-iron.

RELATED: Ford Coyote vs Chevy LS: Which One is Better and Why?

foxbodymods2

An aftermarket head is most definitely the way to go, with modern technology companies like Edelbrock are able to blow the factory Fox Body heads out of the water. Edelbrock E-Street heads are made of lightweight aluminum and flow better than stock, I love these heads because they’re pretty cheap.

  • Hp gain: 30+  rwhp
  • Price: $850+
  • Install: Advanced

3. Camshaft

The cherry on the cake is an aftermarket camshaft. The intake manifold and the heads perform best when complimented with a new camshaft. The most popular 5.0 cam is the Ford Racing E303 cam, providing excellent low-end torque, decent top end power, and an incredible sound at idle.

foxbodymods3

The E303 is a street cam and won’t provide maximum power at the track. Other popular cams include Ford Racing B303, F303, and Anderson N41. I should mention that if you are really serious about your Fox Body, then stay away from the 303 camshafts. Ford designed the 303 cams 20+ years ago and they don’t have the best quality control. The 303 cams also won’t make as much power as a modern design camshaft. You can read more about this in our 303 Cams article.

  • HP gain: 25+ rwhp
  • Price: $200
  • Install: Advanced

I should mention that the first three modifications should be done at the same time since all three of them heavily compliment each other. Seriously, just save up and do all three mods at the same time.

4. Suspension

Unfortunately, the Fox Body chassis doesn’t handle very well in stock form. Plus stock Fox Body suspension sits WAY to high. Most Fox Body owners swap the front suspension to coil-over and put lowering springs in the rear. This generally makes the fox chassis much more balanced, helping eliminate most of the understeer and the tail happy rear end.

RELATED: 7 Reasons why the Fox Body is the Ultimate Muscle Car

foxbodymods1

Raceland makes a nice set of coil overs that are very budget friendly, and really help your Fox Body handle less like a boat. An aftermarket K-member is also an excellent modification. It essentially changed your suspension geometry to a much more desirable setup.

RELATED: How to Choose the Right Fox Body K-Member

If you plan on going to a coil-over setup I would strongly recommend also getting a tubular k-member. Not only will it improve your suspension geometry, it will also save you a ton of weight, and improve chassis rigidity a ton.

  • Price: $500 – $2000
  • Install: Easy

5. 5-Lug Swap

This last modification is something I wouldn’t consider necessary, but if you have the time and the budget then do it. Going 5-lug makes your rear axle MUCH stronger, and gives you a larger selection of wheels to choose from.

foxbodymods4

The most common swap is a rear axle from the newer SN95 Mustang, which has rear disc brakes which are a massive upgrade over the Fox Body rear drum brakes. Going 5-lug also makes your choice of wheels larger, which is always a plus.

  • Price: $400+
  • Install: Advanced

Bonus Mod – Chassis:

Of course, there are a few modifications I really wanted to mention but didn’t fit into the list of five modifications. If you really want to get serious about your Fox Body, you need to stiffen the chassis. The weak Fox Body chassis can make proper suspension setups very hard to obtain.

RELATED: The Story of my 1991 Fox Body Mustang

Subframe connectors are a popular modification that really helps the chassis, as well as the ever popular strut tower brace. Do not cheap out of these parts. Cheap chassis parts will not help your chassis whatsoever and will be a waste of time/money.

A roll cage is also a good idea. Let’s be honest, you’re reading this article because you want your Fox Body to go faster. Nobody is a perfect driver, even professionals crash. If you crash whilst racing without a roll cage you may be rolling the dice on your life. Even a simple bolt in half cage may save you and your occupants lives, plus it’s great for chassis stiffness.

Conclusion

Whether you own a Fox Body, or you are looking to buy one, we would definitely recommend doing these modifications. The head/cam/intake can gain you 100+ hp. The suspension and chassis modifications will add to the handling performance while giving it a mean, aggressive stance.

How to Choose the Right Fox Body K-Member

If you’re in the market for a new k-member for your Fox Body there are some things you need to consider before purchasing one. In this short guide we’ll cover what the k-member is, its function, and what to look for in an aftermarket one.

What is a K-Member?

The K-member on the Fox Body chassis is basically the piece that ties everything in the front together. It’s what your engine is bolted to, as well as your front suspension and steering rack. Since it pretty much ties everything together the rigidity is very important.

Build Material

Like I mentioned above, the rigidity of the k-member is extremely important. Just like how subframe connectors improve the chassis rigidity, so does the k-member. High-end k-members will typically be made of chromoly. Chromoly is extremely strong and fairly lightweight, but it is very expensive. Low-end k-members will typically be made of mild steel, which is weaker than chromoly and slightly heavier, but it’s much cheaper.

Suspension Geometry

One of the best features of an aftermarket k-member is the ability to change the suspension geometry. One of the most common geometry changes is to move the front wheels forwards. This helps with drag racing as it makes the vehicle more stable, as well as help keep the front end down when launching the vehicle.

RELATED: Here’s Why the Fox Body is the Best Muscle Car Ever

Aftermarket k-members can also bring slight change to camber, caster, suspension pick-up points, and a coil over setup. For a street Fox I would definitely stay with a factory geometry k-member to simply your alignment. Most k-members will require you to switch to a coil over setup, so keep that in mind when you decide to get an aftermarket k-member for your Fox Body.

Engine Mounts

With the insane popularity of the Chevy LS engine, it’s no surprise that people want to swap it into their Fox Body. However, this poses a few issues, mainly engine placement and engine mounts. An aftermarket k-member can solve these issues and make your engine swap a much simpler operation.

Price

This is undoubtedly the most important factor when deciding what k-member you should purchase. For a street driven Fox Body I would recommend a mild steel tubular k-member with factory geometry. The low cost of mild steel will save your wallet and you’ll still experience the benefits of a tubular k-member.

If you plan on track racing your Fox Body I would definitely recommend getting a chromoly k-member with track focused suspension geometry. Although it will be significantly more expensive, chromoly will help shave weight off the front of your Fox Body which is very important for track racing.

RELATED: Top 5 Fox Body Mods You Need

If you plan on drag racing your Fox Body look for a k-member that will push your front wheels forwards slightly. It might decrease your Fox’s cornering capability but it will be more stable down the 1/4 mile and you’ll be able to launch it harder.

Summary

Remember, the k-member pretty much holds the entire front end of your Fox Body together, so try to avoid cheaping out when you get one. You’re better off saving for a bit longer and purchasing a higher quality chromoly k-member. Here’s a good place to start your search for the perfect Fox Body k-member.

Fox Body Mustang vs IROC-Z: Which One is Actually Better?

The Chevy Camaro and the Ford Mustang have always been major rivals. They’re the cars that have always defined the pony car segment. Personally, I’m not a huge Mustang fan, but the Fox Body is undeniably awesome.  But, how does the Fox Body stack up to one of the most iconic Camaro models ever?

4. Price

Obviously, the price of these pony cars brand new doesn’t really matter in today’s age. However, the used price can be a huge factor on which one is better for you. For detailed information be sure to read our Fox Body Buying Guide. But to briefly cover the prices: the Fox Body costs around $4-5k for a decent condition example, and the IROC-Z is around $3-4k for a similar condition example.

RELATED: Here’s What Makes the IROC-Z so Awesome

The money you save on purchasing an IROC-Z could can towards modifications to improve handling since it is a little lacking in both the Camaro and Mustang chassis. But the Fox Body is quickly rising in price, so from an investment perspective the Fox Body is better, but from a young car guy with little money, the IROC-Z may be the better choice.

3. Factory Performance

Although factory performance is really a nonfactor today, it is an important comparison point. Although many people thought muscle cars handled awful the fox body prove that to be wrong. Fox body Mustang was one of the very first cars to pull over 1G on the skidpad as tested however it is not perfect. The Roxy gets a better braking setup with 4 wheel disc brakes and a panhard bar on the rear of Fox Body does not.

Fox Body Mustang
Horsepower: 220 @ 4,200 rpm
Torque: 300 @ 3,200 rpm
Weight: 3,000 – 3,200 lbs

IROC-Z
Horsepower: 220 @ 4,200 rpm
Torque: 320 @ 3,200 rpm
Weight: 3,100 – 3,350 lbs

RELATED: Here’s Why the Fox Body is the Ultimate Muscle Car

Although the made similar power and torque, the Fox Body was still able to edge out in many performance tests thanks to its low weight. However, the IROC-Z redeems itself with a rear panhard bar which improved handling as well as a much better braking setup. Both will make a great autocross car, drag car, or street cruiser.

2. Aftermarket

The small block Chevy engine found under the hood of the IROC-Z is undoubtedly one of the most modified engines in the world, and it has been featured in hundreds of racing series. The small block Ford is also very popular amongst hot rodders, but it’s not as popular as the Chevy. Ford Racing makes some of the most popular small block Ford parts such as the “303” camshafts and the ever popular GT-40 cylinder heads. Although Chevy does have its own performance parts division, it doesn’t really seem to be very popular for small block Chevy parts.

As far as total aftermarket (exterior, interior, engine, suspension, etc) the Fox Body is probably better. This is due to how popular the Fox Body chassis has become with young hot rodders who seem to stay away from the IROC-Z. As mentioned above Ford also supplies some of the most popular parts for the Fox Body. We’ve covered the top modifications that the Fox Body chassis needs to be sure to check that out.

1. Looks

This last section is very objective so don’t take it personal if you’re a die-hard Camaro or Mustang fan. Back in the ’80s and ’90s car styling was in an odd phase. Cars were going from massive for comfort to small for efficiency. They also were going from they boxy design to a more futuristic and curvy design. So all that together put both muscle cars in a very odd position. The result of this was odd styling for both vehicles.

The Fox Body looks nothing like Mustangs of the past. Gone were the traditional tri-bar taillights in favor of long horizontal tail lamps. The front end was also nothing like the traditional Mustang styling. The fastback shared a similar shape to Mustangs of the past, as did the notchback. Most people seem to prefer the body of the notchback, however, I personally prefer the fastback.

RELATED: Fox Body Mustang Buying Guide

The Camaro definitely shares the same body lines and basic shape as Camaros before it, however, it definitely has the same ’80s styling as the Fox Body. Like the Fox Body, it also has long horizontal tail lamps and the same four-eyed headlights as the early Fox Body. The IROC-Z featured ever-popular ’80s body kit, which really completes the look of the IROC-Z in my opinion.

Summary

So, in conclusion, the Fox Body is the lighter weight vehicle which ultimately makes it better stock vs stock, but the IROC’s advanced suspension and braking setup are better when the road gets twisty. The small block Chevy has a stronger aftermarket, but the Fox Body chassis as a whole is more popular with hot rodders. Both are pretty cheap to buy right now but the Fox Body is quickly becoming sought after and is an excellent investment opportunity.

7 Reasons The Fox Body Mustang is The Best Muscle Car Ever

Over the past 5 years the Fox Body Mustang has exploded in popularity, especially with young hot rodders. The funny thing is, most youngsters don’t even know what a Fox Body Mustang is, and I don’t blame them. The Fox Body is a hidden gem in the automotive world, so you better get one before they’re all gone. Before we jump into why you need one, let’s quickly cover what a Fox Body is.

What is a Fox Body Mustang?

drawing mustang concept ford 5.0

A Fox Body Mustang is a Mustang produced anywhere from 1979 to 1993. It doesn’t matter if it’s a coupe, convertible, or a hatch. It also doesn’t matter what engine is has either, or transmission. As long as it’s between the ages of 1979 and 1993, it’s a Fox Body.

Why is it called a “Fox Body”? I know, it’s a really weird name to give to a car. But, it’s called a Fox Body because it’s on the Ford Fox platform. Ford designed the Fox platform as a unibody chassis and used it across a wide range of Ford/Lincoln/Mercury vehicles. Ford’s main objective with the Fox platform was to downsize the massive cars they made in the ’70s.

Why is it called the “Fox” platform? I am unable to find a sure reason why Ford identified this chassis as “Fox”. But, I assume it has something to do with how it downsized their vehicles. Ford’s vehicles went from being big like a cow to small and nimble like a Fox.

Now that you know what a Fox Body is, let’s talk about what makes them so awesome. Also, if you doubt my knowledge or credibility: The Story of my 1991 Fox Body Mustang.

7. ’80s Goodness

Ah, the ’80s, something that the Fox Body represents strongly. No other car can you drive today without previous Fox Body owners striking up conversations about how much fun they had in these cars back in the day. Hell, even my mother had a Fox Body back in the day, although she ended up totaling it. The day I came home in my Fox Body she was dying to take a ride in it. What other cars can bring people from completely different generations together? The only vehicle I can think that brings people together like a Fox Body can is a Jeep.

Fox Body Mustang

Fox Body Mustangs also represent vehicle styling from the ’80s and ’90s. The long horizontal tail lights, the factory GT body kit, the simple body lines. Look at a BMW E30 and try to tell me it doesn’t look similar to a Fox Body couple. Even the interior screams the ’80s, which is awesome because back then interiors weren’t cluttered with fancy junk. All you have is a steering wheel, pedals, gear shifter, and a basic radio.

Another great thing about ’80s cars is that you have to drive it yourself. What do I mean by this? Modern Mustangs come equipped with traction control, stability control, line lock for burnouts, and ABS. The Fox Body has none of the above, your right foot is the traction control. If you throttle mid-corner you better know how to control a drift or you’ll end up crashing. If you want to survive driving a Fox Body you’d better learn how to drive really well.

6. Camaro Killer

Back in the ’80s and ’90s there was always stoplight racing between the Camaro and Mustang. However, the Fox Body was almost always faster in a straight line. They both have similar power and torque, but the Fox Body’s low weight give it an advantage on the Camaro. The Fox Body weighs in around 3,000-3,200 lbs depending on the model and body. The 3rd gen Camaro weighs in around 3,300-3,400 lbs. A few hundred pounds might not sound like a huge amount but it’s a huge advantage especially when drag racing.

RELATED: Ford Coyote vs Chevy LS: Which One is Better?

Fox body Mustang

The Camaro had a more advanced rear suspension and braking system, which makes it stop and handle a little better. But, these are American cars, and most people never take their cars to a road course or Autocross. The Fox Body’s lack of rear pan hard bar holds it back when it comes to autocross and circuit racing. Simply adding a pan hard bar to the rear axle will greatly improve the Fox Body’s handling.

The 3rd gen Camaro LT engine is based entirely off small-block Chevy engines before it. But, the TBI and TPI fuel injection systems aren’t very popular with tuners. For this reason many 3rd gen Camaros are carb/aftermarket EFI swapped. When is comes to the aftermarket I would definitely say the small block Chevy is more popular. But, that’s not to say the small block Ford isn’t popular in the aftermarket.

Both the Fox Body Mustang and the 3rd gen Camaro are unbelievably fun to stoplight race. Even in their stock condition, they’re an absolute riot, but the Fox Body will almost always take the win. 3rd gen Camaros also have this weird stigma. If you drive a 3rd gen everyone thinks that either you’re a hillbilly, or have a mullet.

5. They’re Sexy as Hell!

Whether you love or hate the style of the Fox Body, you’ll probably agree that it’s interesting. But, it doesn’t really resemble Mustangs of the past. Lack of “tri-bar” tail lamps and the wonky front end definitely set it apart from the typically Mustang. The Fox Body definitely has it’s design flaws, for example, the GT’s rear bumper is hideous. The GT’s bumper literally a giant square with a weird lip at the bottom, and the LX’s rear bumper is to short.

Like I said earlier, the Fox Body represents vehicle styling of ’80s automobiles. Many enthusiasts considered cars like the BMW E30 to be one of the best-looking cars to ever be created, and the Fox Body shares much the BMW’s ’80s styling. I think that’s partly why the Fox Body is becoming really popular with the younger generation. Just look at the Fox Body below and try to tell me it’s not a good-looking car. If you decide you need to buy a Fox Body, be sure to read our Fox Body buying guide.

Fox Body Convertible Cobra Mustang

The Fox Body Mustang came in a Fastback, Coupe, and a Convertible. This was the last generation Mustang that was available in a fastback before the 2015 Mustang. In the eyes of the younger generation, the Fox is incredibly good-looking. Like I said above, this is probably due to its ’80s styling and small size compared to new Mustangs. Performance shops such as Saleen put their own twist on the body styling of the Fox Body. Arguably the best-looking body kit for the Fox Body is the Cobra style body kit on the convertible Fox Body seen in the picture above.

Saleen Fox Body

Fox Body Mustang

Generally, the Notchback (Coupe) is more desired, mostly because of its rarity, but also because it has cleaner body lines and looks better to most people. The coupe is also about 100 lbs lighter making it much more popular with drag racers. I’ve always personally liked the LX hatchback more, but that’s probably just 17-year-old me remembering all the awesome times I had in my Fox Body.

4. Factory Performance, 300 LB-FT of Awesomeness

By no means is a Fox Body Mustang a sports car, in stock form they’re known for their boat like handling, and tail happy rear end. However, the Fox Body Mustang was the first car Motor Trend ever tested that pulled over 1G on a skidpad, pretty impressive for a muscle car that “can’t turn”. The infamous 5.0L doesn’t make large amounts of power by today’s standards, but it made respectable power back when they were new, putting 225 horsepower and 300 ft-lbs of torque to the ground.

Although 225 horsepower is pretty lackluster in today’s world, 300 lb-ft of torque isn’t. That’s what makes these cars so much fun to drive, the fact that you don’t even have to rev them out to have a great time, they just want to spin the tires at all RPMs.

Also Read: 7 Weird Things You Never Knew About the Ford Mustang

Fox Body Mustang

Luckily, 225 horses is actually a good amount considering the Fox Body weighs in at 3,100 lbs in stock form. With a bit of weight reduction (fiberglass hood, a/c delete, etc.) can achieve a weight of under 2,900 lbs, less than a modern VW Beetle. My personal Fox Body Mustang had a pretty significant amount of weight reduction; gutted interior, A/C delete, aluminum heads, etc, and it could achieve 0-60 in about 5 seconds. That puts it on par with a 2015 Mustang. For specifics visit: Foxbody Wikipedia

My personal 1991 Mustang LX

1991 Foxbody Mustang LX Light Blue Cobra R Rims sexy arizona cars

Check out: Top 5 Must Have Mods For Your Fox Body

With such a light car, you can imagine how fun this car is to drive around. They’re not a role-model when it comes to handling, mostly thanks to their “live axle” rear end, but that’s okay because they’re cornering characteristics are fun, not fast. Like I said above, 300 lb-ft of torque makes the Fox Body want to spin tires at any RPM, and who doesn’t like burnouts?

3. Aftermarket Performance

It’s a Mustang, what do you expect? The aftermarket parts are nearly endless, from engine accessories to suspension components. Factory performance parts are extremely abundant too since the Fox Body Mustang shares many components with Mustangs as new as 2004. This is because SN95 and New Edge Mustangs are on the same Fox platform as the Fox Body Mustang. So, I’m sure you can imagine how many parts are available for the Fox Body.

Fox Body Mustang

Ford saw an opportunity to get their foot in the aftermarket, and they created Ford Racing Performance Parts. Ford Racing makes some of the most popular parts for the Fox Body Mustang such as the E303 and B303 camshafts, as well as the GT40-X aluminum cylinder heads. I will say that the Ford Racing engine components aren’t as good as aftermarket companies. The GT40 heads will never flow as well as a true aftermarket set of heads, and the Ford Racing cams are also heavily outdated. However, the Ford Racing components are dirt cheap compared to the normal aftermarket prices for similar parts.

One of the interchangeable parts between the Fox Body and newer Mustangs is the Cobra independent rear suspension, which is a near bolt-on part. The Cobra IRS makes the Fox Body Mustang platform handle like a true sports car, getting rid of all the classic Mustang “wheel hop” that can happen if you hit a bump mid-corner. Other Cobra parts like the steering rack are also easily interchangeable, just imagine all the praise the 03-04 Cobra gets, but in the 3,000 lb Fox Body chassis.

Also Read: Why are Jeeps so Ridiculously Expensive?

There are countless amounts of companies that produce engine components, suspension, and ascetic parts for your Fox Body. One of the biggest and best sources for Fox Body parts is American Muscle, they only sell Mustang parts and really know what they’re doing when it comes to building Mustangs.

2. They’re like Legos

What’s your dream build? Drag car? Drift car? Street cruiser? Well, you can literally do anything you want to a Fox Body. Since Mustangs from 1979 to 2004 are almost identical under the skin. You can plop in a built 302ci or even a larger engines like a 351w and build a drag car. Installing a Cobra IRS (Independent Rear Suspension), some steering changes and you’ll have an awesome drift car. You could build a mild little 302ci and cruise around the streets racing from stoplight to stoplight having a good time. World famous drifter Vaughn Gittin Jr. uses a Fox Body for his “Drift Missile”, and he says “The Fox Body is the best-kept secret of drifting”

Foxbody Drift Car

Maybe you want a canyon carver? You can build a Fox Body Mustang like Matt Farah from The Smoking Tire, with fender flares to fit stupid wide tires at all 4 corners, big brakes from a Cobra, IRS from a Cobra, steering rack from a Cobra, and a bunch of chassis/frame stiffening. All of this combined with a slightly built 302, and you’ve got a stupidly grippy Fox Body that will run down nearly anything in the Canyons.

Check Out: Ford Goes all Aluminum, When Will Chevy Follow?

Want an even crazier Fox Body? Well, shove a Coyote 5.0 or an LS engine in it and you’ll be putting down 400whp+ and you’ll have one stupidly fast, and stupidly reliable Fox Body Mustang. If you’re really a diehard Ford enthusiast you could even put a supercharged 4.6L Terminator motor in it.

No matter what direction you choose to go with your Fox Body, people have already done it, documented it, and are willing to share information on what works and what doesn’t. Plus, with all the parts you can source from the Cobra, you can keep the factory reliability, but make it much faster.

1. It’s a Classic

If it’s older than me, it’s probably a classic…. right? The Fox Body is now wandering into the 25+ year-old range depending on what year you own, which means it’s starting to become a “classic”. When cars start to be considered classics, their prices go up. CNN Money even mentioned the Fox Body Mustang in their Top Ten Investment Cars under $5,000. On top of it becoming a classic, it’s also facing a similar issue to the 240sx’s “Drift Tax”. Youngsters getting into hot rods are scooping up Fox Body Mustangs left and right, causing the prices to go up even more.

Fox Body Mustang

Seriously, hop on Craigslist and try to find a nice Fox Body for less than $2,000, it’s literally impossible to find a rust free Fox Body that’s been taken care of. On top of youngsters and collectors driving the price up, enthusiast drivers are also picking these up for their next project, and I don’t blame them. 3,000 lbs, endless parts to choose from, and endless directions to go with your build, who wouldn’t want a Fox Body as a project car? Think of it almost like a stock market, if you invest in a Fox Body, it’ll be worth way more 10 years from now. The rising prices are already happening, just 5 years ago they could easily be had for a $2k – $3k, and now decent condition Fox’s are $5k+.

Is a Fox Body Mustang For You?

Ask yourself, have you ever wanted to go do donuts and street racing just for the thrill? Have you ever been jealous of that one old guy in your neighborhood who owns a classic car? Do you love the feeling of a cammed muscle car? If you answered yes to any of those questions, then you need to start looking for a Foxbody for yourself.

As a matter of fact, we love the Fox Body so much that we listed it in our “Top 4 Sports Cars for Under $4,000

When I was 17 I LOVED tuner cars, but then I took a ride in my friends Fox Body, and I fell in love with it so much that I traded my Jeep for a Foxbody a few days later. So, even if you are a die-hard tuner, or maybe you just don’t like Mustangs at all, I promise you from the bottom of my heart, the first time you drive a Foxbody Mustang you’ll fall in love with it.

Summary

Overall the Fox Body chassis is extremely good in almost every way. It has that ’80s and ’90s nostalgic feeling, and that awesome ’80s look. With a plethora of ground effects to choose from, it will always look sexy. It hammered Camaros back in the day, and still will today if it has enough modifications.

If you have the money to get a Fox Body, do it today, seriously. It will be the best car you ever bought. Plus if you end up not liking it you could always hold on to it for a few years and double your money. Let me know what you think of Fox Body Mustangs in the comments below!

The Story of my 1991 Fox Body Mustang

If you read the story about my 1993 Jeep Cherokee, then you know I ended up trading it for a 1991 Mustang. In this quick article I’m going to share everything I can about my 1991 Mustang.
Please excuse the poor quality photographs. At the time of ownership I only had an iPhone 4 to take photos with.

Backstory

I never had an interest in getting a Mustang for any reason, but that all changed when I took a ride in my friends Fox Body Mustang. His was a mild 306ci, but I was blown away by how torquey and fun it was. So later that night I began my search for a Fox Body of my own. What I found was a 1991 Fox Body that had previously been used as an autocross car. I texted him asking if he wanted to trade for an XJ Cherokee and he said yes.

It had nice Cobra wheels, lots of engine stuff I didn’t understand, and it was Fox Body. In my mind it sounded like a perfect scenario.

Getting the Mustang

The next day my friend and I hopped in my Jeep Cherokee and drove to the other side of Phoenix, Arizona. I checked out the Mustang but didn’t really know what I was looking at under the hood. We did a little test drive and I liked how fast it was, so we went through with the deal.

Intake manifold gasket replacement

1991mustang2

It drove back home perfectly fine, but the flaws quickly became apparent. Holes in the firewall caused a lot of heat to come into the cabin which was super obnoxious. It wasn’t until I got it home that I noticed it was burning oil. Not just a little oil either. Upon start up there was noticeable smoke, and at full throttle there was also quite noticeable smoke. But, it was really fast and really fun so I overlooked the flaws.

Modifications

It’s has been a few years since I owned that Mustang, so I can’t remember every single part that was on it. I do remember most of them though, so i’ll do my best to tell them all to you.

Suspension:

  • Unknown coil overs up front.
  • Lowering springs in rear.
  • Cobra R wheels.

Interior:

  • Radio delete
  • Aircon delete
  • Rear seat delete
  • Center console delete

Engine:

  • Factory 302 block
  • Edelbrock E-Series street heads w/ port & polish
  • Ford Racing E303 camshaft
  • Unknown 1.7 rockers
  • Summit carb intake
  • Summit 600 cfm carb
  • MSD Ignition system
  • 6,500 rpm limit

Drivetrain:

  • Stock 5-speed transmission
  • Stage 3 clutch
  • 3.73 rear gears

Exhaust:

  • Unknown shorty headers
  • Unknown X-Pipe
  • No catalytic converters
  • Flowmasters 40 series
  • Dumped before rear axle

If you are familiar with Fox Body Mustangs, then you know that some of these are very common mods. To put it simply, it had the typical HCI (Heads, Cam, Intake), a carb swap, and a gutted interior. I will never know why it was carb swapped, but there were a lot of interesting things going on with that Fox Body.

Stage 2 clutch/rear main seal/new flywheel install

1991mustang1

RELATED: Top 5 Must Have Fox Body Mods

Although I never had it dyno tested, it should’ve made around 300whp with the modifications that it had. The previous owner claimed it made 400 horsepower at the crank but I don’t believe that to be true.

Stories

Remember when I told you that it all started when I took a ride in my friend’s Fox Body? Well it didn’t end there. We spent countless nights cruising around together trying to race anyone we could find. Needless to say, we destroyed ALOT of Hondas.

The first race I ever had in my Fox Body was against a Porsche Boxster on the highway. It was an older man driving the Porsche, but he was game to race. It was probably a 60-120 mph and the Porsche put up a good fight, but was no match for my Mustang. As a matter of fact, the only race I ever lost was to another Mustang, which happened to be a sleeper.

Radiator replacement

1991mustang3

Before all the awesome races and hooning I had to learn the Mustang. The second or third day of ownership I learned just how powerful it was. I was turning right pretty quickly to get onto the highway onramp. I got greedy with the throttle and ended up spinning out unexpectedly. Luckily I spun out into the gravel on the side of the road and nothing was damaged.

Before you get mad in the comments about how much of a reckless driver I was, understand that I only did these things when it was safe to do so. Races took place at night in low traffic areas. Me spinning out also took place at 2am when no one was around that I could possibly injure.

The Major Flaws

No vehicle is complete without its flaws, unfortunately the Mustang had quite a few. It was basically built as a budget race car, and whoever built it didn’t really know what they were doing.

Factory wires were cut all over the place, makeshift harnesses were created out of all green wires. The carpet looked like it came from Home Depot (It was ridiculously thick), the lack of interior parts made the cabin loud on the road. The holes in the firewall let engine heat in, plus no A/C in the Arizona summer time SUCKED.

The first day of ownership

Fox 5

It burned a good amount of oil, it was carbureted, and after I replaced the clutch it was open header for a while which was insanely loud and annoying.

The way I describe my Mustang to people is this: “It was a POS, but it was a really fast and fun POS”.

Why I got rid of it

Eventually I turned 18 years old, and decided to get a motorcycle. I tried to sell my Mustang for over a month with no bites, so I called up my buddy who had been trying to buy it from me for a while and told to come down to my house with cash. He gave me $1,700, and I immediately got a Ninja 250 that night.

RELATED: 7 Reasons the Fox Body is the Ultimate Muscle Car

Do I regret getting rid of it? Yes and no. It was very fast and very fun, but it was also a POS. It had been ghetto rigged in many different ways by previous owners, and that was really annoying. I plan on building another Fox Body in the future, until then i’ll stick with Jeeps.